So I finally got some cuttings to send out some decent roots, and shoots. I thought I would pot up 3 of them today. I put them in a nice light textured potting mix. But my problem is, I think I over watered them. After putting the soil in, I watered them in like I do any plant. After reading more post, that seemed like too much water. I put plastic bags over them to keep the small leaves from drying out. So what are my chances that they will not mold?

Make sure there is a drainage hole (or holes).  The excess water will flow through the medium and out the hole(s).  The cuttings will be fine.

Cut a corner off the plastic bag for ventilation.  That'll prevent excess humidity.

When you think the roots are well enough developed, take the bag off for a few hours.  If you get wilting, put it back and try again in a couple days.  If you don't, then leave it off.  Note that a plant with good roots and no bag will require more watering.  But with a well draining medium, you can rely on the drainage holes to prevent overwatering. 

If you have roots they will be probably fine. They rot when there are no roots yet. The light mix helps with drainage, so I guess you will be ok. Dont worry and keep an eye on them. Good luck and happy holidays.

Wow! Thanks for the quick replies! There are large holes in the bottom of the pots, so lots of drainage. Even if the bottom of the bag is open, I should cut the corners out of the bags?