Register  |   | 
 
Encanto Farms Nursery > Topics > Auction to benefit the Foundation?
 
 


Reply
  Author   Comment   Page 1 of 3      1   2   3   Next
WillsC

Avatar / Picture

Registered:
Posts: 1,698
Posted Reply with quote  #1 
While a bit off topic,  there have not been any foundation benefit auctions in awhile so I thought what the heck.  I have just finished up 5 cherry end grain cutting boards that I make and my wife donates to Hospice for their annual auction.  I had enough cherry left over for a couple more so figured why not help out the fig cause. 

Last time I donated something and had an auction Aaron and DesertDance pitched a fit against it for some reason that still mystifies me so I am hoping this time they remain silent.   I make NO MONEY from this, I LOSE money since I bought the lumber.....hope that clears things up.  

The auction will be run in another thread and will start as soon as I finish the board.  Thought maybe some would like to see how they are made?  A bit of preadvertising for the auction:)

The boards are big, about 18" long by 16" wide and 2" thick, very heavy.  End grain boards are what the professionals use as they are self healing, have anti microbial properties and the knife literally bounces up off the board aiding in cutting while protecting and preserving the knives sharpness.  The board will have feet under it to hold it up off the counter and those feet are NOT counted as part of the thickness.   Not to be confused with the cheaper boards that are edge grain or flat grain. 

The board starts out as 2 6-10" wide and 8' long pieces of raw lumber.  This is not Lowes type lumber this is raw lumber right from a sawmill.  

!cid_20140802_142728.jpg 

!cid_20140803_115651.jpg 
 
As you can see it isn't straight so the first thing you do is hook it to a jig that has a straight edge and run it through a tablesaw to get one straight edge.  


You can see the wood a lot of times is not flat either.  So I cut it in half lengthwise and you can still see how cupped it is in the picture below.

!cid_20140802_145858.jpg 
It is then run through a jointer to flatten one face and one edge.

!cid_20140804_204904.jpg 

See if anyone spots the anomaly in the pic above:)  

We then put the pieces through the planer which flattens the other side and takes the lumber to the thickness you want.

!cid_20140802_150805.jpg 

So once cut up it went from that cupped unstraight board to this.....pretty lumber.

!cid_20140802_151307.jpg 

You then cut it into random width strips and glue them together.  

!cid_20140802_161015.jpg 

You need two of the glued up panels to make one end grain board.  At this stage if you were making a regular flat grain cutting board you would be done and have two 24"x18" cutting boards.

!cid_20140804_101255.jpg 

That is the stage they are at now. .....will add pictures as the process moves along.  

I should say....some may be wondering is that really cherry?  Yes.  Cherry when raw is lighter colored but as it ages and is exposed to the light it turns that rich dark red we are use to seeing in furniture.  

To be continued......
waynea

Registered:
Posts: 1,886
Posted Reply with quote  #2 
Can't wait. This should be a good auction. All positives.
BLB

Avatar / Picture

Registered:
Posts: 2,936
Posted Reply with quote  #3 
Very cool that you are doing this. Bobby Flay might wanna join us now just so he can bid on this board!
newnandawg

Registered:
Posts: 2,535
Posted Reply with quote  #4 
Willis, a very nice project and for an excellent cause. I would think only positive comments.
WillsC

Avatar / Picture

Registered:
Posts: 1,698
Posted Reply with quote  #5 
The panels being cut to width on a sled on the tablesaw. 



!cid_20140805_105753.jpg 


Standing the cut pieces on their sides just to have a look.  
!cid_20140805_112431.jpg 

And the board.  Alternated a strip out of each panel.  The edges all need cleaned up so it fits together tightly then glue and trim and lots of sanding.  

!cid_20140805_112443.jpg 
FiggyFrank

Avatar / Picture

Registered:
Posts: 2,713
Posted Reply with quote  #6 
You're an awesome guy, Wills!
__________________
Frank
zone 7a - VA
Hershell

Avatar / Picture

Registered:
Posts: 650
Posted Reply with quote  #7 
Wills, surly your mistaken. No one would have even a slight problem with money being raised to benefit the foundation now would they? And further more if any one mistakenly did so don't you think they would apologize. Although I do remember one member posting that I had earned a free cutting as a new member but I never received it. Oh well others have certainly made up for it, there are some great folks here.
__________________
Hershell Zone 8. Ray City, Ga.
Dave

Avatar / Picture

Registered:
Posts: 1,482
Posted Reply with quote  #8 
Willis The cutting board is looking awesome using the end grain for the surface is the way to go reminds me of the old time butcher blocks , can't wait to see the finished product cherry wood is one of my favorites as you said it darkens with age , just gets better looking as time goes on!
__________________
Connecticut - Zone 6B  Wish List - Bordissot negra rimada
Charitup

Registered:
Posts: 592
Posted Reply with quote  #9 
Way to go Willis good job and should be a beauty.  Just reminded me I have a pile of Cherry wood in the barn.  I need to come up with some projects and time.  Thank you for doing this work at your own expense for the foundation.

blessings
__________________
goss
North Ga.
zone 7
waynea

Registered:
Posts: 1,886
Posted Reply with quote  #10 
Sorry Wills, I only purchase cutting boards made out of FIG WOOD. Just send the leftover small branches to me for proper disposal.



[image]

Just kidding, I definitely will bid.
Chivas

Registered:
Posts: 1,675
Posted Reply with quote  #11 
Looks like great progress so far, I miss having access to jointers and planers, so much work you can get done with them.  If you include shipping I will bid hahah.
__________________
Canada Zone 6B
FiggieFive_0

Avatar / Picture

Registered:
Posts: 259
Posted Reply with quote  #12 
That's gonna look really purdy!  Mahalo, Wills.
__________________
Nate

Faith, Family, Friends, and Figs (not necessarily in that order).
rafaelissimmo

Avatar / Picture

Registered:
Posts: 1,473
Posted Reply with quote  #13 
Very generous of you, I hope it works out for the best.
__________________
Zone 7b, Queens, New York
drphil69

Avatar / Picture

Registered:
Posts: 803
Posted Reply with quote  #14 
Very nice work!  And very generous of you as well.
__________________
Phil - Zone 7A - Newark, DE Newbie fig lover just trying to learn.
pitangadiego

Avatar / Picture

Moderator
Registered:
Posts: 5,447
Posted Reply with quote  #15 
Would love to have a shop like yours!
__________________
Encanto Farms Nursery
http://encantofarms.com
http://figs4fun.com
http://webebananas.com
"pitangadiego" everywhere
gorgi

Avatar / Picture

Registered:
Posts: 2,864
Posted Reply with quote  #16 
Am I missing something?!?

From all the little woodworking I know;
and after all that hard work,
I would have cut the 'final' boards
along-the-grain (not across).
__________________
George, NJ_z7a.
Dave

Avatar / Picture

Registered:
Posts: 1,482
Posted Reply with quote  #17 
Gorgi Thats how all the old butcher blocks were constructed the end grain is much tougher 

Could you image how many T-bones were cut on this baby? 

0270_1_lg.jpg 

__________________
Connecticut - Zone 6B  Wish List - Bordissot negra rimada
waynea

Registered:
Posts: 1,886
Posted Reply with quote  #18 
Dave, I was going to show the same. I remember the butcher block at the neighborhood meat market during my growing years. It looked almost like the photo only larger. I remember a lady neighbor who had a smaller bloc and loved the wearing because she could put certain foods on it (eggs, etc..) while cooking and not worry about them rolling onto the floor. I love butcher blocs.
WillsC

Avatar / Picture

Registered:
Posts: 1,698
Posted Reply with quote  #19 
Gorgi,

Cut the way you describe,   along the grain and stood up would be a edge grain board.  Edge grain is what they use most commonly for roll out boards or pastry boards.  For that purpose they are ideal as they are slick.  End grain is across the grain then stood on end so the end grain is up.  Picture it as a fist full of drinking straws all pointed up.  Those tubes allow the knife to fall between the tubes and not cut them which makes the board long wearing.  On edge grain picture the same hand full of straws held lengthwise so the ends are side to side you would be cutting straight across the fibers which causes much more damage and faster wear.  

Here are a couple boards I made recently that were gifts.  The smaller ones are cheese boards and are edged in live oak.  They are soaking in mineral oil which is what makes them resist water and protects the wood.

20140606_091040.jpg 

20140606_091046.jpg 

20140606_091059.jpg 



Hoosierguy86

Avatar / Picture

Registered:
Posts: 246
Posted Reply with quote  #20 
Beautiful!
__________________
Scott N. Indiana 5b/6a
rafed

Registered:
Posts: 5,308
Posted Reply with quote  #21 
That looks nice Wills.
I'll have to get with you about making some coffee tables.
WillsC

Avatar / Picture

Registered:
Posts: 1,698
Posted Reply with quote  #22 
Quote:
Originally Posted by pitangadiego
Would love to have a shop like yours!


Hershells is nicer:)  I love vintage machinery.  That tablesaw in the picture is an old unisaw, 450ish pounds)  It was built just before WWII.  Drove 6 hours one way to get it. You can stand a nickel on edge next to the blade and turn the saw on and it never even wiggles.  They just don't build quality like that any more.  Scroll saw from the 1930's, jointer and planer are from the early 1960's, Drill press from the 1950's same with the bandsaw.  The only modern tools I own are ones they didn't make back then like the cordless Dewalts and compound sliding miter saw.  
gorgi

Avatar / Picture

Registered:
Posts: 2,864
Posted Reply with quote  #23 
OK.
Wood is one of the most natural resources we have on this planet earth.
And it can be used in many different ways.
Thanks for the explanation.
__________________
George, NJ_z7a.
indestructible87

Avatar / Picture

Registered:
Posts: 548
Posted Reply with quote  #24 
Looks good wills, wish I had the know how to do things like this.
__________________
Travis Pittsburgh, PA
indestructible87

Avatar / Picture

Registered:
Posts: 548
Posted Reply with quote  #25 
Looks good wills, wish I had the know how to do things like this.
__________________
Travis Pittsburgh, PA
RichinNJ

Avatar / Picture

Registered:
Posts: 1,687
Posted Reply with quote  #26 
Quote:
Originally Posted by WillsC
......Last time I donated something and had an auction Aaron and DesertDance pitched a fit against it for some reason that still mystifies me so I am hoping this time they remain silent.   I make NO MONEY from this, I LOSE money since I bought the lumber .......


That was a classic train wreck....
waynea

Registered:
Posts: 1,886
Posted Reply with quote  #27 
I am glad you showed the finished product, it is really nice. Can't wait for the auction.
JD

Avatar / Picture

Registered:
Posts: 1,162
Posted Reply with quote  #28 
Wills,
I appreciate your knowledge and skill coupled with a nice collection of classic tools. Very interesting and more to talk about. Excellent thread and an even better gesture for the foundation.
__________________

jd | tallahassee.fl | zone 8b
Rewton

Avatar / Picture

Registered:
Posts: 1,946
Posted Reply with quote  #29 
Wills, I'm sure the cutting board you auction off will provide a lifetime of use to the lucky bidder.  I'm also impressed with your tools.  I have a craftsman table saw that I purchased used for one project.  It worked well but needs a better fence.  I have been planning on doing more woodworking projects but another hobby is taking up most of my free time...guess which hobby that is?
__________________
Steve MD zone 7a
MGorski

Registered:
Posts: 370
Posted Reply with quote  #30 
Well done, very beautiful result, thanks for showing your process Wills. Whoever wins your finished work has a treasure to pass on to the next generation.

Mike in Hanover, VA
__________________
Zone-7, previously Mescalito
FMD

Avatar / Picture

Registered:
Posts: 1,327
Posted Reply with quote  #31 
Wills, you are a man of many talents! Very generous of you, too.
__________________
Frank
Tallahassee, FL Zone 8b  
 

North Florida Figs
Hershell

Avatar / Picture

Registered:
Posts: 650
Posted Reply with quote  #32 
This cutting board is going to be a unique piece for someone's kitchen. Wills, those are beautiful.
__________________
Hershell Zone 8. Ray City, Ga.
blueboy1977

Avatar / Picture

Registered:
Posts: 459
Posted Reply with quote  #33 
Wow Uncle Wills! Jack of all trades are you? Very impressive work! My oldest son made me a cutting board in wood shop this past school year out of Walnut. It came out very nice;)
__________________
Rob
Zone 9a/9b were the too meet. South Houston Tx

Growing:  Black Madeira, Smith, LSU Scott's Black, Improved Celeste, VDB, MBvs, RDB, Unknown Peach/Apricot, Salce, Malta Black, Texas BA-1, JH Adriatic, Atreano, CDDN, CDDB, CDDG, Strawberry Verte
twovkay

Registered:
Posts: 264
Posted Reply with quote  #34 
Beautiful workmanship! This will be a nice addition to anyone's kitchen.
__________________
Von Northern VA 7a
Figfinatic

Registered:
Posts: 761
Posted Reply with quote  #35 
Beautiful. Thanks for showing the whole process. When's the auction?
__________________
Wish: Sbayi, passiflora incense, quadrangularis or others
WillsC

Avatar / Picture

Registered:
Posts: 1,698
Posted Reply with quote  #36 
Thanks all.  The auction will be when it is finished, should be by the weekend.  Like Rewton said other hobbies interfere.  It is something nice to do when it is raining or in the afternoons when it is so hot.  

To be clear the boards I posted above is not the board I am building now, just showing what the finished project will look like.  
hungryjack

Avatar / Picture

Registered:
Posts: 518
Posted Reply with quote  #37 

Very nice work !

Aaron will probably create a new name for your wood this time around.
__________________
Big Apple/Fig, New York 6B
garden_whisperer

Avatar / Picture

Registered:
Posts: 1,613
Posted Reply with quote  #38 
very nice indeed
__________________
Dave Zone 6b Illinois

"Be the change you wish to see in the world"
WillsC

Avatar / Picture

Registered:
Posts: 1,698
Posted Reply with quote  #39 
Quote:
Originally Posted by hungryjack

Very nice work !

Aaron will probably create a new name for your wood this time around.



:)
HarveyC

Avatar / Picture

Registered:
Posts: 3,294
Posted Reply with quote  #40 
Great job and thanks for showing the turtorial.

Is the guard on your Powermatic jointer original?

Do you have any thoughts on the suitability of chestnut for a cutting board?

What did you treat the gift boards in the photos above with?
__________________

Harvey - Correia Farms
Isleton, CA (Sacramento County) USDA zone 9b, Sunset zone 14

http://www.figaholics.com
https://www.facebook.com/Figaholics
rcantor

Avatar / Picture

Registered:
Posts: 5,727
Posted Reply with quote  #41 
Beautiful craftsmanship! 
__________________
Zone 6, MO

Wish list:
Galicia Negra, De La Reina - Pons, Genovese Nero - Rafed's, Sbayi, Souadi, Acciano, Any Rimada, Sodus Sicilian, any Bass, Pons or Axier fig, any great tasting fig.
WillsC

Avatar / Picture

Registered:
Posts: 1,698
Posted Reply with quote  #42 
Harvey,

Good eye on the guard, it is not original.  That is not the anomaly I meant but still impressive you knew it was not the right guard.  

Chestnut can be used as can most all nut woods.  Some are more neutral than others and some have tighter pores making them a better choice like cherry, black walnut and maple.  Lumber from live oaks and water oaks I have found make very nice boards and as long as you keep them maintained they work perfectly and chestnut would be in that same pore type.

The liquid on those boards is mineral oil, it is applied until the board won't soak any more up.  It fills the pores and protects the wood.  It is the only oil to use on one.   I use something called spoonbutter to maintain mine, it is a mix of mineral oil and beeswax.  Rub in, let sit, wipe off and done.  If you do that monthly the boards will outlast our grandchildren.   
WillsC

Avatar / Picture

Registered:
Posts: 1,698
Posted Reply with quote  #43 
Final glue up is all done, tomorrow can take the clamps off and start the sanding.

!cid_20140806_135047.jpg 
HarveyC

Avatar / Picture

Registered:
Posts: 3,294
Posted Reply with quote  #44 
Have you ever sawn your own lumber?  I have a chestnut tree that died last year for some reason and it's about 8-12" in diameter and I've thought of sawing it into lumber.  I just haven't got around to cutting the tree down but don't believe it's split at all yet.
__________________

Harvey - Correia Farms
Isleton, CA (Sacramento County) USDA zone 9b, Sunset zone 14

http://www.figaholics.com
https://www.facebook.com/Figaholics
svanessa

Avatar / Picture

Registered:
Posts: 905
Posted Reply with quote  #45 
I'm in trouble...I want that board. :-)
__________________
Sue
Zone 9B, 1946'
Ramona, CA
San Diego County
pitangadiego

Avatar / Picture

Moderator
Registered:
Posts: 5,447
Posted Reply with quote  #46 
I'll take that as a $200 bid, Sue.
__________________
Encanto Farms Nursery
http://encantofarms.com
http://figs4fun.com
http://webebananas.com
"pitangadiego" everywhere
WillsC

Avatar / Picture

Registered:
Posts: 1,698
Posted Reply with quote  #47 
Harvey,

I have used a bandsaw mill in the past.  In Alaska and other places they use chainsaws to cut rough boards from trees, they sell a guide just for that purpose.  
greg88

Registered:
Posts: 800
Posted Reply with quote  #48 
Beautiful!
will be curious as to what the one you are auctioning brings.
I am just getting into wood working and have recently purchased an old Wallace 6 ''Jointer that I am trying to learn to use.
__________________
Greg North West Arkanasas Zone 6b
Wish list: any SPECTACULAR cold hardy figs, and/or perhaps a Niagra Bl., Laradek EBT, Kathleen's Bl, Hunt, a great UNK or anything anyone wants me to have???
Aaron4USA

Avatar / Picture

Registered:
Posts: 2,969
Posted Reply with quote  #49 
LOL, you guys are just too funny.
Ruuting

Avatar / Picture

Registered:
Posts: 613
Posted Reply with quote  #50 
Greg, don't practice on your fingers, you need those to pinch figs :)
Woodworking is something one should only do after a full night's sleep.
__________________
Rui
Southeast CT, zone 6B
Previous Topic | Next Topic
Print
Reply