Register  |   | 
 
 
 


Reply
  Author   Comment  
ajv73

Avatar / Picture

Registered:
Posts: 141
Reply with quote  #1 
I'm building a greenhouse from scratch. Partly because my wife wants it. Partly because I think it might help with the figs ripening here in Pittsburgh. The base is up and the walls are framed. I'm going to frame the roof tomorrow. So I need some advice. Does anyone have experience with the clear roof panels Lowes sells? Worried those won't last. Considering upgrading to a multi-wall polycarbonate. Opinions appreciated. If anyone knows a better place to buy that would be great to know too. Thanks..Tony
__________________
Tony V. - Western PA, Zone 6a
GreenFin

Avatar / Picture

Registered:
Posts: 684
Reply with quote  #2 
I don't know, but I wanted to offer you encouragement anyway :)

You're gonna have a lot of fun with it once you're done!

__________________
James, zone 6a Kansas (zone 10 greenhouses); wish list is in my profile
http://www.FigCuttings.com

Hershell

Avatar / Picture

Registered:
Posts: 650
Reply with quote  #3 
I build greenhouses for a living. Cheapest is two layers of poly 6 mill 4 year inflated with a blower.
__________________
Hershell Zone 8. Ray City, Ga.
fignutty

Registered:
Posts: 580
Reply with quote  #4 
You want something that diffuses the light. Both 6 mil poly and the polycabonate panels come in types that add some diffusion.

If double inflated 6 mil 4yr poly the inner layer should be diffusing often called IR. It also reduces heat loss at night. The outer layer should be clear.

Diffused light is more efficient because it penetrates better to the lower leaves and evens out shadows.

__________________
Steve in Alpine TX 7b/8a
Wish list:  Sangue Dolce, Siblawi, Victoria, Emalyn's Purple, Colonel Littman's Black Cross
Dave

Avatar / Picture

Registered:
Posts: 1,482
Reply with quote  #5 
Hey Tony, I built a lean to greenhouse last year I used the fiberglass roof panels from Lowes and I am very happy with them This is not the first time I have used them, I have some panels over a large opening for a basement window and it's been there about 14 years and it is still as good as the day I bought it, as for the roof on the greenhouse I choose the white over the clear the stuff is very strong when applied correctly if you use it don't forget to use the wavy strips it helps to support the roof and of coarse the screws with the rubber seal the nails are no good they pull out hope some of the information helps 

P1010601.JPG 


__________________
Connecticut - Zone 6B  Wish List - Bordissot negra rimada
ajv73

Avatar / Picture

Registered:
Posts: 141
Reply with quote  #6 
Thanks. I don't want to spend a fortune. But I want it to last at least 10 years. So I think I'll have to go with something like corrugated clear plastic or twin walled polycarbonate sheets. Any ideas on that. My wife will have to look at it right out the kitchen window. So, as she said "it's gotta look good" too. Thanks
__________________
Tony V. - Western PA, Zone 6a
Hershell

Avatar / Picture

Registered:
Posts: 650
Reply with quote  #7 
Most of the houses I build are out of polycarbonate and I can't afford it for myself. We use it at schools because of it's durability.
__________________
Hershell Zone 8. Ray City, Ga.
ajv73

Avatar / Picture

Registered:
Posts: 141
Reply with quote  #8 
Glad I asked. I wasn't aware that I didn't want clear. So if I go with the Lowes stuff like Dave get the translucent? Btw, nice job Dave.
__________________
Tony V. - Western PA, Zone 6a
Dave

Avatar / Picture

Registered:
Posts: 1,482
Reply with quote  #9 
Hershell thats why I still have plywood on the walls as I find a deal on it I will put it in I did happen to find some amber and red plexiglass I thought it would add a nice touch and besides I get enough light through the top for what I am doing 

IMG_1481.JPG 


__________________
Connecticut - Zone 6B  Wish List - Bordissot negra rimada
waynea

Registered:
Posts: 1,886
Reply with quote  #10 
Dave, do you move your figs outside in the summer or do they get enough sunlight in the greenhouse to fruit?
Dave

Avatar / Picture

Registered:
Posts: 1,482
Reply with quote  #11 
I move them all outside the ones that are in there now are either air layers  or cuttings anything needing rest and relaxation I did leave the Jolly Tigers in all the doors were open and they just enough sun block not to burn up 
__________________
Connecticut - Zone 6B  Wish List - Bordissot negra rimada
james

Avatar / Picture

Registered:
Posts: 1,653
Reply with quote  #12 
I've wondered about reusing the large sheets of corrugated plastic used for political signs. They seem ideal for greenhouses and are potentially free after an election.
__________________
In containers - Littleton, CO (zone 5b)
In ground - N.E of Austin, TX (zone 8b) 

2016 Wish List:  Dārk Pōrtuguese, Grānthāms Royāl, Lātarolla, Negrettā, Nōire de Bārbentāne, Rockāway Green, Viōlet Sepōr, Viōlette Dāuphine.  Iranian figs are always welcome.

Hershell

Avatar / Picture

Registered:
Posts: 650
Reply with quote  #13 
Dave. It's too bad your not closer. I said it was expensive, I didn't say that I have a stash of twin wall. Now I know where all of the JT's hang out.
__________________
Hershell Zone 8. Ray City, Ga.
ajv73

Avatar / Picture

Registered:
Posts: 141
Reply with quote  #14 
So Dave you get enough light with the white?
__________________
Tony V. - Western PA, Zone 6a
CAJUNB

Registered:
Posts: 131
Reply with quote  #15 
Hey Tony,I have also used the clear fiberglass sheets from lowes,its holding up great and the plants love it......and in the summer I add the green shade cloth  to cool it off abit .
hungryjack

Avatar / Picture

Registered:
Posts: 518
Reply with quote  #16 

White is great for overwintering use.
White lowers transmission of light
and thus heat buildup during those warm and bright winter days,
helps prevent the trees from budding out too soon.

White generally has a transmission value of 50% or less,
clear green house films are in the 85%+ range.

Rule of thumb,
reduce light transmission by 1%
it reduces plant growth by 1%

So you can reduce heat by limiting the light and plant growth with white plastic,
or  use clear plastic and ventilation to deal with the heat.


__________________
Big Apple/Fig, New York 6B
fignutty

Registered:
Posts: 580
Reply with quote  #17 
You don't want the white poly film for summer use that is about 55% light transmission vs 91% claimed for clear and IR 6mil poly.

A good example of what is available are the dynaglass corrugated polycarbonate from the Greenhouse Megastore.

Clear is 92% transmission and 1% diffusion
Solarsoft 90 is 90% transmission and 40% diffusion
Solarsoft 85 is 85% transmission and 100% diffusion
Opal = white is 42% transmission and 100% diffusion

http://www.greenhousemegastore.com/product/solarsoft-90-corrugated-polycarbonate/plastic-sheets

My experience is that all claimed transmission values are too high according to my light meter. But 80-90% transmission and 40-100% diffusion defines a good covering for figs IME.

For corrugated I'd chose Solarsoft 85 if single layer and Solarsoft 90 if double layer.

__________________
Steve in Alpine TX 7b/8a
Wish list:  Sangue Dolce, Siblawi, Victoria, Emalyn's Purple, Colonel Littman's Black Cross
ajv73

Avatar / Picture

Registered:
Posts: 141
Reply with quote  #18 
More great info. Are the corrugated solarsoft panels superior to the ones sold at lowes/homedepot? They sell ones that are 90%. The crating and shipping from greenhouse megastore will far exceed the cost of the panels themselves.
__________________
Tony V. - Western PA, Zone 6a
fignutty

Registered:
Posts: 580
Reply with quote  #19 
Tony:

I don't know how Lowes panels would compare to others. But if both are polycarbonate they're probably similar. There are other ways to get diffusion if you can only find clear panels locally. I've put a single layer of the Agribon 19 inside my clear. This drops the light and heat slightly while adding diffusion. I tried two layers and thought that a bit much. It probably won't be because I'm a bit of a freak about providing adequate light.

__________________
Steve in Alpine TX 7b/8a
Wish list:  Sangue Dolce, Siblawi, Victoria, Emalyn's Purple, Colonel Littman's Black Cross
Dave

Avatar / Picture

Registered:
Posts: 1,482
Reply with quote  #20 
Hershall thanks for the offer someone gave me some plexiglass sheets that had the paper stuck to them I spent all day with a power washer the paper came off but the glue wouldn't I couldn't even sand it off which is what I did with the Amber and Red it gives it a nice frosted finish "the search continues" Hershall keep the secret about the JT's between me and you LOL

Tony V I think that the white corrugated roof  is perfect I have a couple of friends that have greenhouses which have a clear material and it was way too hot so they had to end up buying shade cloth I killed 2 birds with 1 stone with the white Last year was my first time using this greenhouse to store my trees this is what they look like in March I had roughly a 3 month jump start "it doesn't get any better than that" 

P1010602.JPG


__________________
Connecticut - Zone 6B  Wish List - Bordissot negra rimada
fignutty

Registered:
Posts: 580
Reply with quote  #21 
Dave brings up a good point about the tradeoffs between light, heat, and cooling options in a greenhouse/hightunnel. If a greenhouse isn't equipped with active cooling then one may have to compromise light levels in order to reduce over heating. Tony doesn't say how he plans to cool his structure or I missed it. But that affects covering choices to a large degree.

My greenhouse has full out evaporative cooling and large exhaust fans so I can allow high light levels and associated heat. For a structure like Dave's one has to dial back the light to avoid over heating.

__________________
Steve in Alpine TX 7b/8a
Wish list:  Sangue Dolce, Siblawi, Victoria, Emalyn's Purple, Colonel Littman's Black Cross
ajv73

Avatar / Picture

Registered:
Posts: 141
Reply with quote  #22 
You guys all bring up good points. And I'm totally impressed by Dave's greenhouse. I never imagined it would give you such a jump on the season.

For cooling I was going to be rather simple. I was going to put 2 hinged openings - one on each side by the ridge board. One to blow out hot air. The other to suck in cool air. But maybe I need to think about that more.

Thanks

__________________
Tony V. - Western PA, Zone 6a
garden_whisperer

Avatar / Picture

Registered:
Posts: 1,613
Reply with quote  #23 
Growers solution on ebay sells 6 mill greenhouse plastics that is garenteed for four years. have had mine for three with no issues and enough left to re-plastic it again if it peters out. might be something to look into, cheeper than pannels and easy to install.
__________________
Dave Zone 6b Illinois

"Be the change you wish to see in the world"
ajv73

Avatar / Picture

Registered:
Posts: 141
Reply with quote  #24 
I thought I posted this already. But it's not showing up. So here I go again. What about plexiglass? Somebody selling 4x8 sheets on craigslist for cheap. Herscell maybe you know since you're in the business. If it transmits to much light I just saw in growers supply you can get a sun shade for cheap?
__________________
Tony V. - Western PA, Zone 6a
ajv73

Avatar / Picture

Registered:
Posts: 141
Reply with quote  #25 
Last question. Anyone ever use Solexx? Seems to have similiar properties to solarsoft but comes in a roll. So no crating fee and has free shipping through wayfair.
__________________
Tony V. - Western PA, Zone 6a
Hershell

Avatar / Picture

Registered:
Posts: 650
Reply with quote  #26 
Sorry. I can't answer questions other than construction related. The customer ordered it and I install it. School and universities all have there own ideas of what is best. However I am in the office a lot and can ask the guys that keep up with these details.
__________________
Hershell Zone 8. Ray City, Ga.
hungryjack

Avatar / Picture

Registered:
Posts: 518
Reply with quote  #27 
Plexi gets brittle in winter.
__________________
Big Apple/Fig, New York 6B
tmc2009

Registered:
Posts: 854
Reply with quote  #28 
I built a lean to with polycarbonate panels from Griffin Greenhouse and nursery supplies.  Their catalog shows they have a place in Morgantown PA if that helps.

Here are some of the videos I posted on youtube showing the construction.













__________________
Tom
Massachusetts Zone 6b
ajv73

Avatar / Picture

Registered:
Posts: 141
Reply with quote  #29 
Thanks for additional suggestions. I'm going to pass on the plexiglass if it gets brittle. Unfortunately, Morgantown Pa is about 4 1/2 hrs away. Going to keep looking. Here is a picture of my progress so far. Roof still needs framed. It's not very big but it should help. Thanks..Tony

Attached Images
jpeg image.jpg (969.58 KB, 23 views)


__________________
Tony V. - Western PA, Zone 6a

hungryjack

Avatar / Picture

Registered:
Posts: 518
Reply with quote  #30 

Whatever material you choose for the roof,
remember the snow load, make sure the material can handle it.

 


__________________
Big Apple/Fig, New York 6B
rcantor

Avatar / Picture

Registered:
Posts: 5,727
Reply with quote  #31 
The only rule I know is build it at least 3 times bigger than you think you want  :)
__________________
Zone 6, MO

Wish list:
Galicia Negra, De La Reina - Pons, Genovese Nero - Rafed's, Sbayi, Souadi, Acciano, Any Rimada, Sodus Sicilian, any Bass, Pons or Axier fig, any great tasting fig.
ajv73

Avatar / Picture

Registered:
Posts: 141
Reply with quote  #32 
If I only had the space :) I have a nice sized yard...but I'm city folk.
__________________
Tony V. - Western PA, Zone 6a
Dave

Avatar / Picture

Registered:
Posts: 1,482
Reply with quote  #33 
If you do go for the corrugated roof keep in mind they have 2 different qualities 1 has a 10 year warranty and the other has a 20 year warranty and there is a big difference between the 2 

http://www.cranecomposites.com/industries/bp/sequentia_cor.html

__________________
Connecticut - Zone 6B  Wish List - Bordissot negra rimada
ajv73

Avatar / Picture

Registered:
Posts: 141
Reply with quote  #34 
Thanks Dave. I actually just got a price from a local supply company for Crane (Sequentia Weatherglaze) panels. The lower end wasn't any more than Lowes. I'm going to call back and see how much the commercial grade is. The thing I'm wrestling with most is whether to go clear or white? The greenhouse has a great exposure and will get a ton of sun. So maybe white is the way to go. I don't want to bake the plants. Also, Lowes sells a Tuftex translucent white with a 78% light transmission with a limited lifetime warranty. So not sure which brand is better. Thanks..Tony
__________________
Tony V. - Western PA, Zone 6a
Chivas

Registered:
Posts: 1,675
Reply with quote  #35 
twin wall to quad wall poly carbonate is very good material, won't break as easily but costs a fortune, will cut down on heating though.
__________________
Canada Zone 6B
cis4elk

Avatar / Picture

Registered:
Posts: 1,718
Reply with quote  #36 

The roof of our sun room is twin wall polycarbonate, same as Tom used and Chivas mentioned. I don't know when it was installed, I have to guestimate maybe 15 years ago. It has handled huge snow load with no problems whatsoever.  In the last two years it has started to degrade and is starting to take damage from moderate sized hail. Panel replacement is on the to-do list for next spring.
In the future, if I were to build a sun room on a new house, I would use the same plan and materials. And as Chivas said, it really does well keeping the heat in.


__________________
Calvin Littleton,CO z5/6
Wants List: For everyone to clean-up after themselves and co-exist peacefully. Let's think more about the future of our planet and less about ourselves.  :)
ajv73

Avatar / Picture

Registered:
Posts: 141
Reply with quote  #37 
I'm still wrestling with which roof to pick for the greenhouse.  I had an easier time picking my kids names!  I was all set on the Crane Composite corrugated panel.  Then I found out that an agricultural supply company 5 miles from me, which I never even knew was there, sells Green-Tek ThermaGlas 6ft x 10ft sheets.  That stuff looks good and has an 80% light transmission.  So I think I might go with that and if it's too much sun get a sun shade....until I change my mind again.  Thanks..Tony    
__________________
Tony V. - Western PA, Zone 6a
Dave

Avatar / Picture

Registered:
Posts: 1,482
Reply with quote  #38 

__________________
Connecticut - Zone 6B  Wish List - Bordissot negra rimada
Dave

Avatar / Picture

Registered:
Posts: 1,482
Reply with quote  #39 
http://www.greenhousecatalog.com/greenhouse-covering

Tony I don't know anything about greenhouses except I had aluminum and glass lean to greenhouse years ago and the first thing I ordered after getting it up was shade cloth to wrap the roof the one that I just built now with the white roof doesn't seem to need any of that I have plenty of light it's always about 10 degrees hotter than the outside temp in summer I am able to keep my plants in there without them burning up in winter it stays around 40 degrees unless it drops outside to 0 or teens then it goes down to about 30's just for the day and warms up,hope some of this information helps  whatever you choose to do I wish you luck with your project. 

__________________
Connecticut - Zone 6B  Wish List - Bordissot negra rimada
ajv73

Avatar / Picture

Registered:
Posts: 141
Reply with quote  #40 
Thanks Dave.  Now my head is going to explode.  I guess I'm going to do some more reading.  Good info.
__________________
Tony V. - Western PA, Zone 6a
Previous Topic | Next Topic
Print
Reply